Power Tools
Corded, cordless and pneumatic tools for fabrication, maintenance and site work: angle grinders, drills and hammer drills, impact drivers and impact wrenches, rotary hammers and breakers, jigsaws, cut-off machines and oscillating tools, with the batteries, chargers and accessories that keep them running.
With power tools, the duty cycle decides the purchase. A grinder that runs all shift and one that is used twice a week are different buys, even when they look the same.

Power Tools

Angle grinders in 100, 125 and 180 mm; drills, hammer drills and impact drivers for fixing and fabrication; impact wrenches and cordless ratchets for fastening; rotary hammers and demolition breakers for concrete; and jigsaws, oscillating multi-tools and cut-off machines for cutting. A rotary hammer (SDS) drills concrete far faster than a hammer drill, and an impact driver drives long screws that would stall a drill.
Power Tools we supply
Power Tool Accessories

Batteries and chargers, and accessories such as chucks, guards, side handles, brushes and bit holders. Batteries only fit their own platform, so a team standardised on one battery system can share packs and chargers across drills, drivers, grinders and lights.
Power Tool Accessories we supply
Pneumatic Tools

Air impact wrenches, air blow guns and other pneumatic tools for workshops with compressed air. Air tools are light, cool-running and built for continuous use, but they need the air supply to match: check the tool's air consumption against your compressor, and the operating pressure (typically around 6.2 bar) at the tool, not at the tank.
Pneumatic Tools we supply
Brands we supply for power tools
Power tools are where warranty and service matter most, which is why we stick to brands we are authorised for. You get genuine tools with manufacturer warranty, and a clear route when one needs repair.
Industries that buy power tools from us
- Engineering & Fabrication
Grinders and drills that run every shift, matched to the right wheels and bits.
- Automotive & Auto Components
Impact wrenches and cordless drivers for line maintenance and fixture work.
- Construction & Infrastructure
Rotary hammers, breakers and one cordless platform for the whole site.
- Power & Electrical
Cordless drills, drivers and lights for substation, solar and panel work away from a socket.
Buying power tools: what to get right
What to specify
- Duty cycle
Hours of use per shift. This decides the class of tool more than wattage does.
- Corded, cordless or air
Corded for continuous bench work, cordless for mobility, air where a compressor is already running.
- Battery platform
For cordless, pick the platform first and stay on it.
- Size and chuck
Wheel diameter for grinders, chuck size or SDS type for drills, square drive for impact wrenches.
Common mistakes
- A light-duty tool on production work
It is cheap to buy and replaced within months.
- Mixing battery systems
Three brands of cordless tool means three chargers and no shared packs.
- Ignoring guards and side handles
Most grinder injuries happen with the guard removed. Order the accessories with the tool.
Quality tiers
- Professional and production
Brushless motors, metal gearboxes and overload protection for daily heavy use.
- Trade
Solid tools for maintenance and intermittent work.
- Light duty
For occasional jobs. Not for a shop floor.
Why buy power tools from Balaji Enterprises
We sell power tools on the duty they will see, and we will tell you when a lighter tool is the right answer. As an authorised distributor, we supply genuine tools with manufacturer warranty, plus the wheels, bits and batteries that go with them, from one counter in Siyaganj, Indore, as we have since 1996.
Power Tools: questions buyers ask
Should we buy corded or cordless?
Corded for tools that run continuously at a bench; cordless where people move around the plant or site. Many teams run both, with cordless on a single battery platform.
Do your power tools carry manufacturer warranty?
Yes. We are an authorised distributor, so tools are genuine and covered by the manufacturer's warranty terms.
What size angle grinder do we need?
125 mm is the all-rounder; 100 mm for light work and tight spaces; 180 mm and up for heavy cutting and grinding.
Rotary hammer or hammer drill for concrete?
A rotary hammer (SDS). It drills concrete much faster and with less effort. A hammer drill is fine for occasional small holes in brick.
Can you supply air tools to suit our compressor?
Send the compressor's output and the tools you want to run, and we will check the air consumption fits.
Request a quote for power tools
Tell us the job and the hours of use, and we will quote the right tool and the accessories it needs.
Other categories
- Hand ToolsSpanners, sockets, torque tools, pliers, screwdrivers, hammers, files and kits.
- Cutting Tools & AbrasivesCutting and grinding wheels, discs, hacksaw blades, drill bits, hole saws, taps and dies.
- Tool Storage & WorkshopTool boxes, bags, modular storage, workbenches, bench and pipe vices, work lights.
- Lubrication & Fluid HandlingGrease guns, pumps, couplers, nipples, oil cans, drum pumps, flow meters, hose reels.
- Measuring & LayoutCalipers, micrometers, feeler gauges, tapes, spirit and laser levels, squares.
- Lifting & PullingHydraulic bottle and trolley jacks, table lifters, bearing and gear pullers.
- Material HandlingPlatform trolleys, folding hand trucks, sack trucks and manual stackers.