Hand Tools
Hand tools are the bulk of what a maintenance fitter, a line operator or a site electrician touches in a shift, and the bulk of what we sell. This page covers the whole range we hold at Siyaganj: spanners and sockets for fastening, torque tools for the joints that have to be right, pliers and screwdrivers for assembly and electrical work, and the striking, cutting and finishing tools that sit around them.
Most of it moves to plants in Pithampur, Dewas and Sanwer Road, where the buyer is standardising a tool crib, kitting out a new line or replacing what wore out. The sections below set out what each group includes and what to check before you order.

Wrenches & Spanners

The widest group on the page. Combination spanners (one open end, one ring) are the everyday choice; ring spanners grip all six flats and suit tight or rusted nuts; double open-end spanners are quicker on easy fastenings. Slogging spanners are struck with a hammer for large flange and foundation bolts, and insulated open-end spanners are for live electrical work. Specialist shapes such as crowfoot, flare-nut, hook (C) and valve spanners cover the jobs where a standard spanner will not reach or will round the fitting.
Wrenches & Spanners we supply
Sockets & Drive Tools

Sockets come by drive size (1/4, 3/8, 1/2, 3/4 and 1 inch square drive), depth and grip profile. Chrome hand sockets are made for ratchets and torque wrenches. Impact sockets, in black chrome-molybdenum, are the only kind that should go on an impact gun: a chrome socket can crack under hammering. The drive train around them (ratchets, extension bars, universal joints and adaptors) is where a kit usually comes up short, so order it with the sockets.
Sockets & Drive Tools we supply
Torque Tools

Click and digital torque wrenches, torque multipliers for very high values, torque screwdrivers for small electrical and electronic fasteners, and the interchangeable heads and adaptors that fit them. Choose a wrench whose range puts your usual setting in the middle of the scale, not at either end. ISO 6789 calls for recalibration every 12 months or 5,000 cycles, whichever comes first, and an audited line will want that record.
Torque Tools we supply
Pliers & Cutters

Combination, long-nose, bent-nose and diagonal cutting pliers for assembly and wiring; circlip pliers in internal and external patterns; locking and slip-joint pliers for gripping; and cutters from cable and wire-rope cutters up to bolt cutters. Utility knives, tin snips and wire strippers and crimpers sit here too. For panel and live work, ask for insulated pliers tested to IEC 60900, not pliers with dipped handles.
Pliers & Cutters we supply
Screwdrivers

Slotted, Phillips, Torx and hex screwdrivers in single pieces and sets, stubby and two-in-one patterns for tight spaces, striking screwdrivers that take a hammer blow, nut drivers, and bits and bit sets for drivers and holders. Line testers are listed here as well. Phillips and Pozidriv look alike but are not interchangeable, and the wrong one cams out and ruins the screw head.
Screwdrivers we supply
Product Showcase
Stanley FATMAX V20 Brushless Impact Driver Kit
SBI810D2K-B1: the 18V brushless impact driver with two batteries, charger and case.
View
Hex & Torx Keys

L-keys, T-handle keys, flag keys and folding key sets in hex (Allen) and Torx, metric and AF. Ball-end keys let you work at an angle; a plain short end turns the most torque. Long-series keys are worth having where cap screws sit deep in a mould or a machine base.
Hex & Torx Keys we supply
Hammers & Mallets

Ball pein and cross pein hammers for metalwork, claw hammers for joinery, club and sledge hammers for heavy striking, and the soft-faced end of the range: brass, copper, rubber, PVC and dead-blow hammers that drive a part home without marking a machined face or bouncing back. Spare heads and handles are stocked, so a good hammer with a split handle does not need replacing.
Hammers & Mallets we supply
Punches & Chisels

Centre and dot punches for marking out, pin punches for driving out roll and taper pins, letter and figure punches for stamping, and cold chisels for cutting and dressing metal. Wood chisels, scrapers, pry bars and flange wedges for opening pipe joints are here too. Grind off a mushroomed head on a punch or chisel before it chips into someone's hand.
Punches & Chisels we supply
Files & Rasps

Flat, half-round, round, square and three-square files, hand and mill files, needle file sets for tool-room detail, saw files, and rasps and Surform blades for wood and soft materials. Cut grade (bastard, second cut, smooth) decides how fast a file removes metal and how fine it leaves the surface, so name it when you order. Always fit a handle.
Files & Rasps we supply
Saws

Hacksaw frames for metal, hand saws for timber and board, mitre boxes for square and angled cuts, and general-purpose saws. Hacksaw blades are listed under Cutting Tools & Abrasives, because they are a consumable and are usually reordered on their own.
Saws we supply
Clamps & Vices

C-clamps, F-clamps and bar clamps, and locking clamps for holding work while it is drilled, welded or glued. Throat depth matters as much as opening. Bench and pipe vices are fixed workshop equipment, so they are under Tool Storage & Workshop.
Clamps & Vices we supply
Tool Kits & Sets

Ready-made hand tool kits and accessory kits for a new technician, a service van or a maintenance bay. A boxed kit is the quickest start, but check it against the fastener sizes you actually have. A kit we put together from your list often costs less over its life than a big set that is half unused.
Tool Kits & Sets we supply
Other Hand Tools

The tools that do not fit a family but get asked for every week: caulking guns, riveters, pipe benders, planes and spoke shaves, screw extractors for sheared bolts, wire brushes, tyre levers, multi-tools and site and utility tools.
Other Hand Tools we supply
Brands we supply for hand tools
Most of our hand tool range comes from the brands we are authorised to distribute, which means genuine stock, manufacturer warranty and a supply line that does not dry up halfway through a standardisation programme.
Industries that buy hand tools from us
- Automotive & Auto Components
Line-side spanners, impact sockets and calibrated torque tools for assembly stations and the breakdown crib.
- Engineering & Fabrication
Bench fit-out for new bays: files, hammers, clamps, punches and a complete spanner run.
- Construction & Infrastructure
Site kits that get lost and replaced: hammers, chisels, pipe wrenches, bolt cutters and pliers.
- Textiles & Garments
Small screwdrivers, pliers and spanners issued to fitters by the hundred.
- Power & Electrical
VDE 1000V insulated screwdrivers, pliers, spanners and sockets for discoms, panel builders and solar EPC.
- Pharmaceutical & Life Sciences
Non-sparking spanners, hammers and scrapers for solvent and API areas.
Buying hand tools: what to get right
What to specify
- Metric or AF
Most Indian plants are metric, but imported machinery and older equipment are often AF. Check before you standardise a kit.
- Drive size and depth
For sockets, state the drive and whether you need standard, deep or impact pattern.
- Material
Chrome-vanadium is the norm for hand spanners and sockets; chrome-molybdenum for impact use; aluminium-bronze or beryllium-copper where a spark is a hazard.
- Insulation
For live work, tools individually tested to IEC 60900 at 1000V AC, marked with the double-triangle symbol.
Common mistakes
- Buying the biggest set
A 150-piece set where 40 pieces get used. Buy the sizes your fasteners need, plus the drive train.
- DIY grade on production duty
A spanner that spreads its jaws rounds the nut, and the nut costs more to replace than the spanner.
- Mixed brands across a line
Different handle lengths and jaw profiles make kits impossible to audit and swap. Standardise on one line per station.
Quality tiers
- Production and professional
For tools in use every shift. Taparia and De Neers at the volume end, Stanley and Groz for issued kits.
- General duty
For maintenance bays where a tool is used a few times a week. Good value without paying for duty you will not use.
- Consumable grade
For sites where tools walk or get damaged. Buy for replacement, not for longevity.
Why buy hand tools from Balaji Enterprises
We hold full size runs, not just the popular middle sizes, so a kit can be completed in one order instead of three. Spanners, sockets and keys are stocked in depth at our Siyaganj counter, and we have been supplying Indore's maintenance teams since 1996. Send us a list and we will quote it line by line, marking anything that needs ordering in.
Hand Tools: questions buyers ask
Do you supply VDE 1000V insulated hand tools?
Yes. Insulated screwdrivers, pliers, cutters, spanners and sockets, tested to IEC 60900, mainly from Taparia and De Neers. Tell us the sizes and we will confirm what is in stock.
Do you stock non-sparking hand tools?
Yes, in aluminium-bronze and beryllium-copper: spanners, hammers, chisels, scrapers, punches and brushes, for solvent handling, paint shops and hazardous areas.
Can you put together a tool kit to our own list?
Yes. Send the tool list or the fasteners the kit has to cover, and we quote each item and supply it as one order. That is usually better value than a boxed set.
Metric or AF?
Both. Most spanner, socket and key ranges are stocked in metric and AF. Say which when you order, or send a photo of the fastener if you are not sure.
How often should a torque wrench be recalibrated?
ISO 6789 calls for every 12 months or 5,000 cycles, whichever comes first, and sooner if the wrench has been dropped or overloaded.
Request a quote for hand tools
Send your hand tool list (tool, size and quantity) and we will come back with stock and a written quote.
Other categories
- Cutting Tools & AbrasivesCutting and grinding wheels, discs, hacksaw blades, drill bits, hole saws, taps and dies.
- Tool Storage & WorkshopTool boxes, bags, modular storage, workbenches, bench and pipe vices, work lights.
- Lubrication & Fluid HandlingGrease guns, pumps, couplers, nipples, oil cans, drum pumps, flow meters, hose reels.
- Measuring & LayoutCalipers, micrometers, feeler gauges, tapes, spirit and laser levels, squares.
- Power ToolsGrinders, drills, impact drivers, rotary hammers, breakers, cordless and air tools.
- Lifting & PullingHydraulic bottle and trolley jacks, table lifters, bearing and gear pullers.
- Material HandlingPlatform trolleys, folding hand trucks, sack trucks and manual stackers.