Product Catalogue2 sections · 16 product types

Lubrication & Fluid Handling

Bearings fail from too little grease, the wrong grease or dirty grease far more often than they fail from old age. This category is the equipment that gets lubricant from the drum to the bearing: grease guns and pumps, couplers and nipples, oil cans and jugs, drum pumps, flow meters, filters and hose reels.

Buy it as a system, not item by item. Couplers and nipples from one line actually fit each other, and that is what makes a plant lubrication schedule hold together.

Lubrication & Fluid Handling supplied by Balaji Enterprises, Indore

Greasing Equipment

Greasing Equipment: grease pump

Lever, pistol-grip and air-operated grease guns, bucket and drum grease pumps and pump kits for high-volume points, grease cartridges, and grease fittings (nipples) in straight, 45 and 90 degree patterns. Nipple threads vary (M6, M8, M10, 1/8 BSP and others), so check the thread on the machine before you order replacements. A four-jaw hydraulic coupler that grips the nipple properly stops grease being wasted down the side.

Greasing Equipment we supply

  • Grease Cartridge
  • Grease Fitting
  • Grease Gun
  • Grease Pump
  • Grease Pump Kit

Fluid Handling

Fluid Handling: oil can jug

Oil cans and jugs, measuring jugs and funnels for topping up; rotary and lever drum pumps and drum accessories for dispensing; flow meters for metered issue; filters; oil drains for collecting used oil; and hose, nozzles, couplers and hose reels that keep the line tidy and off the floor. Separate equipment per oil grade, marked by colour, prevents the cross-contamination that ruins gearboxes and hydraulics.

Fluid Handling we supply

  • Coupler
  • Drum Accessory
  • Filter
  • Flow Meter
  • Funnel
  • Hose & Nozzle
  • Hose Reel
  • Measuring Jug
  • Oil Can & Jug
  • Oil Drain
  • Pump

Brands we supply for lubrication equipment

One brand carries most of this category for us. That is deliberate: a lubrication programme fails at the joints, where a coupler from one maker meets a nipple from another.

Authorised distributor
GrozThe full lubrication chain from one line: grease guns and pumps, couplers, nipples, oil cans, drum pumps, flow meters, filters, oil drains and hose reels. The line to standardise on plant-wide.
De NeersGrease guns, grease pumps, couplers, hoses and pumps, as a second source on the most-used items.
TapariaGrease guns, grease pumps, drum accessories and filters.
StanleyGrease guns, pumps, filters and flow meters.
Also supplied
WD-40Penetrating and multi-use spray for freeing seized fasteners and light protection.

Industries that buy lubrication equipment from us

Buying lubrication equipment: what to get right

What to specify

  • Grease gun type

    Lever guns for general use, pistol-grip for one-handed work at height, air-operated where volumes are high.

  • Fill method

    Cartridge for cleanliness and quick changes, bulk fill for volume. Many guns take both.

  • Nipple thread and angle

    Read it off the machine or the manual. Thread pitch varies even at the same diameter.

  • Oil grade separation

    Equipment per lubricant, marked so it cannot be mixed up, and H1 equipment kept physically apart in food and pharma plants.

Common mistakes

  • Mixing greases

    Different thickener types (lithium, calcium sulphonate, polyurea and so on) are not always compatible. Mixed, they can soften and run out of the bearing.

  • One gun for everything

    Moving a gun between greases contaminates both. Buy a gun per grease.

  • Over-greasing

    Too much grease overheats bearings and blows seals. Count strokes and follow the machine's schedule.

Quality tiers

  • Plant programme

    Matched guns, couplers, nipples and drum equipment from one line, for plants running a formal lubrication schedule.

  • Maintenance bay

    A good lever gun, a coupler and a stock of the common nipples.

  • Workshop and vehicle

    Basic guns, oil cans and funnels for occasional top-ups.

Why buy lubrication equipment from Balaji Enterprises

We supply lubrication as a programme, not as single purchases. Send us your grease and oil grades and the number of points, and we will match guns, couplers, nipples and drum equipment from one line, so the parts fit each other the day they arrive. Indore plants have bought it from us since 1996.

Lubrication & Fluid Handling: questions buyers ask

Which grease nipple thread does my machine use?

Check the machine manual or measure an existing nipple. M6, M8, M10 and 1/8 BSP are common. If in doubt, bring or photograph one and we will match it.

Do you supply equipment for food-grade (H1) lubricants?

Yes. We supply dedicated grease guns, couplers and drum equipment that can be kept and colour-coded for H1 use only. The lubricant itself is specified separately.

Can a grease gun take cartridges and bulk grease?

Many can. Tell us which you use and we will confirm the gun suits it.

What do we need to dispense oil from a 210-litre drum?

A drum pump (rotary or lever) with the right bung adaptor, a hose and nozzle, and a flow meter if you want to measure what goes out. A drip tray completes it.

Fitting out a plant, a site or a crew?

Request a quote for lubrication equipment

Send your lubricant grades and the number of grease points, and we will quote a matched set of equipment.

Balaji Enterprises30 years in industrial tools & MRO · Indore, MP