Product Catalogue4 sections · 11 product types

Cutting Tools & Abrasives

These are consumables, the products a workshop reorders every month rather than buying once. Abrasive wheels and discs, hacksaw and knife blades, drill bits and hole saws, and taps and dies all wear out in use, so what matters is the right specification for the material and continuous availability.

A fabrication shop's monthly tool spend is mostly in this category. Getting the wheel and blade right saves more than any discount on a hand tool.

Cutting Tools & Abrasives supplied by Balaji Enterprises, Indore

Abrasives

Abrasives: abrasive disc paper

Cutting and grinding wheels for angle grinders and cut-off machines, flap discs, fibre discs and abrasive paper. Thin cutting wheels are for cutting only: never grind on the face of one. Depressed-centre grinding wheels are for stock removal, and flap discs blend and finish in one pass. Aluminium oxide is the general choice for steel; zirconia cuts faster and lasts longer on heavy stainless and structural work.

Abrasives we supply

  • Abrasive Disc & Paper
  • Cutting & Grinding Wheel

Blades & Consumables

Blades & Consumables: hacksaw blade

Hacksaw blades in carbon steel, HSS and bi-metal; utility knife blades in snap-off and trapezoid patterns; spare blades; and nails, nailer strips and general fasteners for site use. On a hacksaw, keep at least three teeth in the material: 18 TPI suits general steel, 24 TPI tube and angle, 32 TPI thin sheet and conduit. Bi-metal blades survive being twisted, which is how most blades break.

Blades & Consumables we supply

  • Fastener & Consumable
  • Hacksaw Blade
  • Nails & Nailer
  • Spare Blade
  • Utility Knife Blade

Drilling & Hole Making

Drilling & Hole Making: hss drill bit

HSS twist drills for steel and general metal, masonry and SDS bits for concrete and brick, and hole saws for clean large-diameter holes in sheet, panel and wood. Match the shank to the tool: SDS-plus and SDS-max bits only fit their own rotary hammers, and a hole saw needs the right arbor and pilot drill. For stainless, ask for cobalt HSS.

Drilling & Hole Making we supply

  • HSS Drill Bit
  • Hole Saw
  • Masonry / SDS Drill Bit

Threading

Threading: tap die

Hand taps, dies and tap-and-die sets for cutting and repairing internal and external threads. Taps come as taper, intermediate and plug (bottoming). Start a through hole with the taper and finish a blind hole with the plug. Drill the correct tap-drill size first, or the tap will either snap or cut a shallow thread.

Threading we supply

  • Tap & Die

Brands we supply for cutting tools and abrasives

Consumables are bought by the box, so the brand question is really a consistency question: the tenth box of wheels should cut like the first. We stay with a small set of lines that hold their specification.

Authorised distributor
TapariaThe core of this category: cutting and grinding wheels, abrasive discs and paper, HSS and masonry drill bits, hole saws, and hacksaw and knife blades. For a shop whose spend is mostly consumables, this is the line to standardise on.
De NeersCutting and grinding wheels, hacksaw blades, knife blades and taps and dies.
StanleyUtility knife blades, nails and site fasteners, for packing floors and construction trades.
DeWaltHacksaw and knife blades, and nails for DeWalt nailers.
Also supplied
WidiaCarbide cutting tools and inserts for machine shops.
AddisonDrills, taps, reamers and milling cutters for production machining.
MirandaHSS tool bits and drills.

Industries that buy cutting tools and abrasives from us

Buying cutting tools and abrasives: what to get right

What to specify

  • Wheel size and bore

    100, 125 or 180 mm wheels must match the grinder's guard and spindle.

  • Rated speed

    The maximum speed marked on the wheel must be at least the grinder's no-load speed. Never fit a wheel rated below the machine.

  • Grit and material

    Coarse grit (24-40) for stock removal, 60-80 for blending, 120 and finer for finish. Say whether it is for steel, stainless, aluminium or masonry.

  • Blade pitch

    TPI for hacksaws, and blade length and pattern for knives.

Common mistakes

  • Using a cutting wheel to grind

    Thin wheels are not built for side load and can shatter.

  • Buying on the cost of one wheel

    The cheapest wheel often gives the fewest cuts. Compare cost per cut, not cost per wheel.

  • Letting stock run to zero

    Consumables are where a stoppage costs most for least. Set a reorder level from your monthly usage.

Quality tiers

  • Production grade

    For continuous fabrication and machine-shop duty, where cut rate and life decide the cost.

  • General purpose

    For maintenance and occasional cutting.

  • Site consumable

    For blades and bits that are expected to be lost or broken; buy by volume.

Why buy cutting tools and abrasives from Balaji Enterprises

Because these are repeat purchases, we work to your reorder pattern: tell us the monthly usage of each wheel, blade and bit and we keep that quantity moving rather than quoting you from scratch each time. Indore shops have bought their consumables from our Siyaganj counter since 1996, with same-day dispatch on stocked lines.

Cutting Tools & Abrasives: questions buyers ask

Which cutting wheel should I use for stainless steel?

Use a thin wheel marked for stainless or inox, which is iron- and sulphur-free so it does not contaminate the surface. Keep those wheels separate from the ones used on mild steel.

Can I buy wheels and blades in bulk cartons?

Yes. Wheels, discs, hacksaw blades and knife blades are supplied by the box or carton. Send us your monthly quantities and we will quote against them.

Do you supply SDS-max as well as SDS-plus bits?

Tell us the rotary hammer model and the hole size you need, and we will confirm the right shank and what is in stock.

What tap should I start a thread with?

Start with a taper tap and finish a blind hole with a plug tap. Drill the tap-drill size first; we can tell you the right drill for a given thread.

Fitting out a plant, a site or a crew?

Request a quote for cutting tools and abrasives

Send your monthly consumables list (wheels, discs, blades and bits) and we will quote it as a standing order.

Balaji Enterprises30 years in industrial tools & MRO · Indore, MP